Aike Industrial Co., Ltd.

    Home > News > Hydraulic Coupling News

    Tips for using hydraulic quick coupling

    2019-01-04 16:13:46 Aike Industrial Co., Ltd. Read

    Tips for using hydraulic quick coupling

    1546430933814032.jpg

    Before using, make sure that the hydraulic quick coupling hose is twisted or broken.


    Hose should be careful not to be damaged in blocks, concrete and so on, so that it will avoid to be damaged for long time pressing.


    Do not over bend the hose at the end of the hydraulic quick couplings.


    Do not use hangings.


    Do not put hose near fire source to prevent softening or deformation.


    It should be stored in a place with good ventilation and good ventilation.


    The minimum bending radius of plastic hoses should not be less than 30 mm.


    It should be noted that the quick coupling hose should not be damaged by stone and concrete, and not to be pressed for a long time, so as to avoid damage.



    TAG:   Tips for using hydraulic quick coupling
    Powered by MetInfo 5.3.19 ©2008-2019 www.MetInfo.cn